Custom MIM parts
Gears, lock cores, levers, brackets and other small complex shapes in the 0.1–250 g range, moulded to near-net shape so most parts need little or no machining afterwards.
Small, complex metal parts by metal injection moulding — the shapes that are too intricate to machine economically, produced in volume with tight, repeatable tolerances. Need a larger part, or a smaller quantity? We also arrange CNC machined parts to drawing. Send your drawing and get a quote in 2–3 working days.
Every part is produced to your drawing — there is no catalogue and no stock parts. MIM covers small, complex parts in volume; CNC machining covers larger parts and smaller quantities.
Gears, lock cores, levers, brackets and other small complex shapes in the 0.1–250 g range, moulded to near-net shape so most parts need little or no machining afterwards.
Tooling is arranged together with production in Shenzhen. Mould lead time is about two weeks, and the tool can be adjusted quickly after first samples.
316L and 17-4PH stainless parts for applications that need corrosion resistance or higher strength — locks, bathroom fittings and hardware.
Deburring, polishing, and secondary operations such as drilling, tapping and CNC touch-up, so parts arrive ready for your assembly line.
Housings, brackets, shafts, pins and sleeves machined from solid bar or plate — the right route for parts that are too large for MIM, or quantities too small to justify a mould. Quoted per drawing.
Lightweight aluminium housings and fittings, and brass connectors and valve parts, machined to your drawing. Material and finish are confirmed with you in the quote — send the drawing and we will advise.
The part families we quote most often. Everything is custom-made to your drawing — the photos below show typical MIM shapes, not stock items for sale.
Spur, helical, bevel and internal ring gears. Tooth profiles come straight out of the mould, so whole gear sets repeat identically, part after part.
Larger drive wheels, chain sprockets and pinions for tool gearboxes and small machinery — lightening holes and shaped bores moulded in, not machined after.
Gears with the hub, keyway and flats formed in the same moulding — ready to mount on the shaft with no broaching or extra machining.
The working parts inside locks: cores, cams, bolts and latch pieces, with the slots, steps and grooves moulded in at full strength.
Hollow housings and sleeves with cross-holes, flats and internal profiles formed in one moulding — shapes that would take several machining setups otherwise.
Stems, seats, sleeves and cartridge bodies that live inside faucets and valves, in corrosion-resistant grades made for wet environments.
Cases, case backs, bezels and knurled crowns with a bright polished finish — small parts where surface quality is the first thing your customer sees.
Flat and formed parts — brackets, levers, clips, links and hooks — with holes and cut-outs moulded in rather than drilled and milled afterwards.
Gear shafts, threaded connectors, clips and housings in one family photo — the mixed, awkward shapes where MIM replaces several machined pieces with a single moulding.
The little moving pieces inside mechanisms — latches, sliders, triggers and pawls — with the steps, slots and pivot holes formed in the mould.
Handles, eccentric connectors, covers and trim parts for shower mixers and bathroom fittings, in stainless grades that stay bright in wet rooms.
Nozzles, valve spools, sleeves and small discs with fine internal features — precision parts for tools and instruments that repeat identically in volume.
Don't see your part? If it is small (0.1–250 g), complex and metal, it is probably a MIM candidate. Send the drawing and we will tell you honestly within 2–3 working days whether MIM makes sense for it — or whether CNC machining below is the better route.
Not every part belongs in a mould. For larger parts, simpler shapes, or quantities below the MIM minimum, we also arrange CNC milling and turning to your drawing. Photos below are illustrative examples of typical CNC parts.
Flat and blocky parts cut from plate or bar: housings with pockets, flanges with bolt patterns, bearing blocks and angled brackets.
Round parts made on the lathe: stepped shafts, pins, bushings and sleeves, with threads, grooves and flats added as your drawing shows.
Lightweight aluminium parts with drilled and threaded ports — manifold blocks, mounting plates and equipment housings where weight matters.
Parts that are too big for MIM, prototypes, and small batches: machined directly from solid metal, with no mould to pay for first.
Your part is small (0.1–250 g), complex, and you need 5,000 pieces or more. The mould costs money up front, then each part is inexpensive and identical.
Your part is larger, simpler, or needed in smaller quantities. There is no mould cost — you pay for machining time, so it suits prototypes and small-to-medium batches.
Not sure which route fits? That is normal — send the drawing with your target quantity and we will tell you honestly which process makes sense, and quote that one. CNC sizes, materials and quantities are confirmed per drawing before quoting.
Metal injection moulding combines plastic injection moulding with powder metallurgy: fine metal powder is moulded like plastic, then sintered into solid metal.
Fine metal powder is mixed with a polymer binder to make a feedstock that flows like plastic.
The feedstock is injected into a steel mould, forming the “green part” — your shape, slightly oversized to allow for shrinkage.
The binder is removed, typically at around 450 °C, leaving a fragile “brown part” of pure metal powder.
High-temperature sintering fuses the powder into dense, solid metal. Parts are then deburred, polished or machined as your drawing requires.
Stainless steels are the most common MIM materials. Tell us the working environment of your part and we will confirm the grade in the quote.
| Material | Chosen for |
|---|---|
| 316L stainless | Corrosion resistance — locks, bathroom fittings and hardware parts |
| 17-4PH stainless | Higher strength and hardness after heat treatment |
| 304 stainless | General-purpose corrosion-resistant parts |
| Iron-based alloys | Gears and structural parts where cost matters most |
| Other alloys | Ask us — material is confirmed per drawing before quoting |
Three steps from drawing to quotation. No drawing yet? A photo of the part and its rough dimensions is enough to start the conversation.
Use the form below, WhatsApp or email. 2D drawings or 3D files (STEP/STP) both work.
We review manufacturability, confirm the material, and quote the mould fee and unit price for your quantity.
Mould making takes about two weeks. You approve samples first; mass production starts only after your sign-off.
Minimum order (MIM): 5,000 pieces per part. CNC parts have no mould cost, and quantity is confirmed per drawing. Quoting is free and there is no obligation — if neither process is right for your part, we will tell you honestly rather than quote anyway.
Fill in what you know — only your contact and a short description are required. The buttons below open WhatsApp or your email app with everything pre-filled; attach your drawing there.
Our range is 0.1 g to 250 g per part. As a rule, the smaller and more complex the part — and the higher the quantity — the more MIM beats machining on cost.
5,000 pieces per part. Below that, the mould cost is spread over too few parts for MIM to make economic sense.
It depends on the part's size and complexity, so it is quoted per drawing. You receive the mould fee as a separate line in your quotation — no hidden tooling charges later.
Quotation: 2–3 working days after we receive your drawing. Mould making: about 2 weeks, then samples for your approval before mass production.
2D drawings (PDF, DWG) or 3D files such as STEP/STP are ideal. If you only have a physical sample or photos, send those first and we will advise what else is needed.
Yes — CNC milling and turning for parts that are larger than the MIM range, simpler in shape, or needed in smaller quantities with no mould cost. Materials, sizes and quantities are confirmed per drawing; see the CNC parts section above and send your drawing for a quote.
Small, complex and 5,000 pieces or more usually points to MIM. Larger, simpler, or fewer pieces usually points to CNC. If you are not sure, send the drawing with your target quantity and we will recommend the route that makes economic sense.
Yes — ask before you send the files and we will arrange it. Drawings are only used to evaluate and produce your part.